Golf Clubs

Golf Clubs
Golf clubs are the tools we use to strike the golf ball. A golf club has three components: the Head, the Shaft and the Grip. The RULES OF GOLF constrain golf club designs, but the goal of clubmakers is to create golf clubs, within those rules of golf that maximize the physics of the golfers swing while allowing for a range of swing error to provide an accurate, long yet forgiving shot.
A standard set of golf clubs sets consists of three woods (the 1-driver, 3, and 5), eight irons (3, 4, 5, 6, 7, 8, 9, and PW), and a putter – twelve clubs. The rules of golf allow you to carry fourteen clubs in your bag, so many golfers add another iron or a specialty wood. After all, the more tools we have in our toolbox, the easier it is to do our job!
Woods are used to hit long shots. If a golf hole is 450 yards from tee to green, most golfers use a wood to hit off the tee. A wood is a hollow-bodied large headed golf club. Use your woods when you are 175 yards or more away from the green.
The DRIVER (also called the 1 WOOD) has the lowest loft of any golf club. Loft is the angle of the club face that controls trajectory and affects distance. A driver has a loft between 7 and 12 degrees. A custom built drivers can be ordered depending on your requirement. Experienced golfers have traditionally favored lower lofted drivers (less than 10 degrees of loft), which require much more skill to hit than higher lofted drivers.
A dramatic development has occurred over the past several years – professional golfers are throwing out their low lofted drivers and opting for large-headed, higher-lofted 10 and 11 degree drivers. Their argument is that the longest drives are achieved by combining a high launch angle with lower spin. The newer, higher-lofted designs for large-headed drivers provide the higher launch angle; the new solid core golf balls provide less spin on the golf ball. This results in the longest drives. So the professionals are increasingly moving to larger headed higher lofted drivers. They get more carry with less shot error. Just like you should do!
Fujikura golf shafts will best compliment these golf clubs. This change is a huge reversal from prior years. During the mid to late 1990’s, the average loft on the PGA Tour was around 7 degrees. However, those were difficult shots for the pros to make and the ball flight from such a low loft created lots of spin. The experts in ball flight analysis showed that the longest golf drives are achieved with a high launch angle combined with low spin. The new solid core golf balls provide that low spin which was not available in the golf balls of yesterday. A higher lofted club gives the golfer the higher launch angle.

Monark Golf Supply is an established distributor of a large selection of clone golf clubs and discount golf clubs components in business since 1998. We are located in Los Angeles County/CA.

Golf Club
Golf clubs are the tools we use to strike the golf ball. A golf club has three components: the Head, the Shaft and the Grip. The RULES OF GOLF constrain golf club designs, but the goal of clubmakers is to create golf clubs, within those rules of golf that maximize the physics of the golfers swing while allowing for a range of swing error to provide an accurate, long yet forgiving shot.
A standard set of golf clubs sets consists of three woods (the 1-driver, 3, and 5), eight irons (3, 4, 5, 6, 7, 8, 9, and PW), and a putter – twelve clubs. The rules of golf allow you to carry fourteen clubs in your bag, so many golfers add another iron or a specialty wood. After all, the more tools we have in our toolbox, the easier it is to do our job!
Woods are used to hit long shots. If a golf hole is 450 yards from tee to green, most golfers use a wood to hit off the tee. A wood is a hollow-bodied large headed golf club. Use your woods when you are 175 yards or more away from the green.
The DRIVER (also called the 1 WOOD) has the lowest loft of any golf club. Loft is the angle of the club face that controls trajectory and affects distance. A driver has a loft between 7 and 12 degrees. A custom built drivers can be ordered depending on your requirement. Experienced golfers have traditionally favored lower lofted drivers (less than 10 degrees of loft), which require much more skill to hit than higher lofted drivers.
A dramatic development has occurred over the past several years – professional golfers are throwing out their low lofted drivers and opting for large-headed, higher-lofted 10 and 11 degree drivers. Their argument is that the longest drives are achieved by combining a high launch angle with lower spin. The newer, higher-lofted designs for large-headed drivers provide the higher launch angle; the new solid core golf balls provide less spin on the golf ball. This results in the longest drives. So the professionals are increasingly moving to larger headed higher lofted drivers. They get more carry with less shot error. Just like you should do!
Fujikura golf shafts will best compliment these golf clubs. This change is a huge reversal from prior years. During the mid to late 1990’s, the average loft on the PGA Tour was around 7 degrees. However, those were difficult shots for the pros to make and the ball flight from such a low loft created lots of spin. The experts in ball flight analysis showed that the longest golf drives are achieved with a high launch angle combined with low spin. The new solid core golf balls provide that low spin which was not available in the golf balls of yesterday. A higher lofted club gives the golfer the higher launch angle.

A golf club is used by golfers for striking the ball in the game of golf. It comprises a weighted head on one end and has a long shaft on the other end with a grip. Taking a sharp angle to the shaft, the head is fixed sideways to it and the striking face of the head is inclined in such a way that it gives the ball an upward rise. As per the rules of the game, a golfer can carry up to 14 different golf clubs, each one being designed for a particular situation during the game.

Raw Materials Used   
For manufacturing golf clubs, variety of materials such as metals, plastics, ceramics, wood, and composites are used. Based on the mechanical properties such as strength, elasticity, friction, impact resistance, density, etc., different materials are selected for different parts of the clubs.
Golf club heads for drivers and other woods are made from titanium, stainless steel, or graphite, whereas club heads for wedges and irons are made from stainless steel, chrome-plated steel, tungsten, titanium, or a combination of these materials. On the other hand, aluminum, chrome-plated steel, carbon or graphite fiber, or titanium is used in making club shafts.

Various Types of Golf Clubs
Selecting golf clubs is never a problem for golfers, as there are various types of clubs available for different situations in the game.

Irons: These are generally used during the golf training program and as they’ve more control than drivers and fairway woods; they’re also used for shorter distances.
Drivers and Fairway Woods: These clubs are mostly used for hitting longer shots. If the golf hole is 4 to 5 meters away, then most golfers like to use wooden head clubs.

The driver or the fairway wood has a loft between 7 to 12 degrees. Professional golfers usually have drivers with less than 10 degrees of loft, which need a lot more skill to hit.

Wedges: They’re another form of irons. The first wedge, also known as pitching wedge, is generally between 52 and 56 degrees in loft. Wedges are enormously useful for a short strike in the game.
Hybrids: These are recent innovation to golf. Hybrid is a combination of iron and wood and is an option to a long iron. As hybrids are versatile, they can be used in any situation.
The above mentioned are the various golf clubs available in the market and form an important aspect of golf tips.  
 

I am justine.My favorite game is golf.

Find More Golf Clubs Articles

Comments are closed.